The best performance in cracked concrete.

Injection mortar FIS HB

The fischer injection mortar FIS HB is a system component of the fischer Highbond-System FHB II for fixing maximum loads in non-cracked and cracked concrete. Railings, machines and steel constructions indoors and outside can be securely fixed with the fischer Highbond-System FHB II. The special mortar can be used with the conical highbond anchor FHB II-A S (standard version), highbond anchor FHB II-A L (long version) in various steel qualities.

产品型号

Download of image data

产品型号

批准/测试报告

2 个产品型号

Language on label

Contents

Packaging

Amount

GTIN (EAN-Code)

说明 = 可用认证— = 不可用认证

可查看 2 个型号中的 2 个

Advantages

The Highbond system FHB II achieves the highest load values in cracked concrete. This means that fewer fixing points and smaller anchor plates are required.
The injection mortar FIS HB can be worked with the threaded rod FHB II-A S (short version ) or L (long version). Thus, you can select the most economical solution based on requirements.
The large container shape of the injection mortar FIS HB is ideally suited to series installation.

Applications

Guard rails
Façades
Staircases
Steel brackets
Machines
Silo installations
Masts
Rash protection
Steelwork constructions
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Suitable for:

Concrete C12/15

您可以在注册文件中找到有关建筑材料的详细信息。

批准

ETA-05/0164
ETA-16/0637
ETA-21/0948
ETA-06/0171
DoP No. 0282
DoP No. 0293
DoP No. 0327
DoP No. 0355
DoP No. 0281
EPD-Kiwa-EE-000431-EN

Functionality

The injection mortar FIS HB is suitable for pre-positioned and push-through installation.
Resin and hardener are stored in two separate chambers and are only mixed and activated in the static mixer when dispensed through the injection cartridge.
FIS HB can be used with the threaded rods FHB II-A S and FHB II-A L and glues the threaded rod completely in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
The styrene-free vinyl ester mortar fully seals the drill hole.

Mounting Strip 1 Picture

1 / 10

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete

创建于 12/14/2017

DOP - Declaration of Performance

pdf, DoP No. 0282

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)

创建于 01/19/2021

ETA Certification Document

pdf, ETA-16/0637

European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete

创建于 12/14/2017

DOP - Declaration of Performance

pdf, DoP No. 0281

Declaration of Performance for fischer Highbond-Anchor FHB II Inject (Bonded expansion fastener for use in concrete)

创建于 01/19/2021

ETA Certification Document

pdf, ETA-21/0948

European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life

创建于 09/09/2022

DOP - Declaration of Performance

pdf, DoP No. 0327

Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)

创建于 09/16/2022

DOP - Declaration of Performance

pdf, DoP No. 0293

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded expansion fastener for use in concrete)

创建于 01/03/2022

ETA Certification Document

pdf, ETA-06/0171

European Technical Assessment for fischer Highbond-Anchor FHB / FHB dyn / FDA - Bonded fasteners and bonded expansion fasteners for use in concrete

创建于 07/10/2024

DOP - Declaration of Performance

pdf, DoP No. 0355

Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete)

创建于 10/08/2024

ETA-approval
Language on label	CS, DE, EN
Contents	1 x Cartridge 150 ml 2 x Static mixer FIS MR Plus
Packaging	Cartridge
Amount	1 pcs
GTIN (EAN-Code)	4048962164008

ETA-approval
Language on label	DE
Contents	1 x Cartridge 360 ml 2 x Static mixer FIS MR Plus
Packaging	Cartridge
Amount	1 pcs
GTIN (EAN-Code)	4048962159257

Injection mortar FIS HB

产品型号

优点/产品说明

应用和认证

安装说明

文档下载