{"getCategoryById":{"CategoryName":"Wall holders","TextList":[{"Key":"BEZEICHNUNG","Value":"Wall holders","__typename":"CatalogTextItem"},{"Key":"KATFAMTEXTGEN","Value":"

Wall holders

","__typename":"CatalogTextItem"},{"Key":"KAT_POS","Value":"Wall holder for ventilated rainscreen façades.","__typename":"CatalogTextItem"},{"Key":"DOKBSTMARKDESCR","Value":"The wall holders are an essential part of the façade subframe for ventilated rainscreen façades. They are fixed to the building substrate with fischer fixings (such as frame fixings SXRL) and transfer the loads of the façade. The assortment offers the right solution for every application. In addition to the standard L-wall holders, there are, for example, special products for optimised structural-physical efficiency or also for the renovation of façades. To reduce thermal bridges, the wall holders can also be fitted with thermostops. To enable all common insulation thicknesses and façade projections, the wall holders are designed in different projection lengths. To compensate the thermal expansion of the subframe profiles, the wall holders are used both as fixed and sliding points. In addition to the proportional wind loads, the fixed point absorbs the entire dead load of the façade panels and substructure. The sliding point with its slotted holes also ensures that the vertical profile can slide due to thermal expansion. The sliding point also absorbs wind loads.","__typename":"CatalogTextItem"},{"Key":"KAT_ANWENDUNG_GEN","Value":"

Applications

As a wall holder for load transfer into the building substrate of subframe systems in ventilated rainscreen façades

","__typename":"CatalogTextItem"},{"Key":"KAT_BAUSTOFF_GEN","Value":"

Building materials

All building substrates

","__typename":"CatalogTextItem"},{"Key":"EIGENSCHAFTENGEN","Value":"

Properties

Aluminium (e. g. EN AW 6063, 6061) or stainless steel

","__typename":"CatalogTextItem"},{"Key":"KAT_VORTEILNUTZEN","Value":"

Advantages

The loads of the façade system are absorbed and transferred into the building substrate.
In combination with the subframe profiles, tolerances of the building substrate can be compensated.
The design of fixed and sliding points ensures high flexibility.
The thermal expansion of the profiles is enabled by slotted holes in the sliding point wall holder.

","__typename":"CatalogTextItem"},{"Key":"KAT_FUNKTION","Value":"

Functionality

Load transfer to the building substrate
Absorption of loads through the connection to the subframe profiles
Compensation of structural tolerances together with the subframe profiles
Easy installation with conventional fixings

","__typename":"CatalogTextItem"}],"CategoryPath":["1002921377"],"__typename":"CatalogCategoryData"}}