Solar systems

44 mm high aluminium rail for PV panels mounting systems.

83 mm high aluminium rail for PV panels mounting systems.

Bracket for 90° connection of two overlapping Solar rails.

Rail for photovoltaic systems on trapezoidal metal sheet roofs. Suitable for panels with landscape orientation.

Rail for photovoltaic systems on trapezoidal metal sheet roofs. Suitable for panels running along the long side parallel to the trapezoidal rails.

T-shaped aluminium rail for PV panels mounting systems on special structures.

Rectangular hollow cross-section aluminium rail for PV panels mounting systems on special structures.

Aluminium rail for bracing structures for photovoltaic systems.

The reduced cross-section of the SolarLight profile is designed for lower loads and offers an economical solution for the installation of photovoltaic systems.

Aluminium hook with 1 adjustment position for the installation of photovoltaic systems on tiled roofs with a maximum thickness of 30 mm without ventilation strip.

Aluminium hook with 2 adjustment positions for the installation of photovoltaic systems on tiled roofs with ventilation strips of variable thickness.

Accessory base in aluminium compatible with GTA 1 and GTA 2 hooks to widen and raise the support point of the hook off the roof.

Stainless steel adjustable hook for the installation of PV panels on pitched tile roofs without ventilation layer.

Stainless steel hook with fixed height and large base for the installation of PV panels on pitched tile roofs with ventilation layer.

Stainless steel hook with fixed height for the installation of PV panels on pitched tile roofs without ventilation layer.

Stainless steel adjustable hook for the installation of PV panels on pitched barrel tile roofs.

Stainless steel hook for the installation of PV panels on standing seam sheets. Suitable for flat seaming.

Stainless steel hook for the installation of PV panels on standing seam sheets. Suitable for rounded seaming (e.g. Kalzip).

Pre-assembled triangular frame for the installation of PV panels in a lowered position on flat roofs. Suitable for landscape layout installation.

Pre-assembled triangular frame for the installation of PV panels on flat roofs. Suitable for portrait or landscape layout installation.

Universal adjustable clamps for PV panels with aluminium frame from 30 to 50 mm thickness.

Pre-assembled central and end clamps for PV panels with aluminium frame.

Non-assembled central and end aluminium clamps for PV panels with aluminium frame.

End and central clamps for frameless glass PV panels.

Double-threaded screw for fastening photovoltaic systems on roofs with a steel load-bearing structure covered by corrugated panels, faux panels or tiles.

Double-threaded screw for fastening photovoltaic systems on roofs with wooden, concrete or hollow bricks and concrete load-bearing structure, covered by corrugated panels, faux panels or tiles.

Angle bracket for the connection between Solar rails and double-threaded screws.

Flat bracket for the connection between Solar rails and double-threaded screws.

Flat bracket with pre-assembled quick joint for the connection between Solar rails and double-threaded screws.

Flanged hexagon nut in A2 stainless steel with flange.

Self-drilling screws in A2 stainless steel.

Self-drilling screws in A2 stainless steel with EPDM gasket.

Blind rivet with EPDM sealant.

Hammer head screw in A2 stainless steel for Solar rails.

Allen screw in A2 stainless steel.

G EPDM M 10 gasket for double-threaded screws.

Aluminium and PA nylon hammer-head nut.

Butyl adhesive tape for joints between Solar rails.