fischer High performance anchor FH II 12/M6 I R with internal thread stainless steel

Name: fischer High performance anchor FH II 12/M6 I R with internal thread stainless steel
Brand: fischer

Product variants

Download of image data

Top Features

Maximum installation comfort due to rapid expansion.
Visual setting control for approval-compliant fixing.
High flexibility: Conventional metric screws and threaded rods can be used.
Made of stainless steel for fixings used outside.

Art.-Nr. 532780
Setting tool FH II-I M6-M10
Art.-Nr. 549932
Quattric II 12/110/165 S

The intelligent internal thread anchor made of stainless steel with easy mounting for fixings in cracked concrete.

Advantages

The international approvals guarantee maximum safety and the best performance.
The internal threaded anchor allows the removal of the attachment and the fixing point can be reused.
The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
The optimised geometry intelligently reduces the energy required for assembly.
The approval regulates the use of hollow drills.

The fischer high-performance anchor FH II-I is an internal threaded anchor made of stainless steel. The anchor is set in the pre-positioned installation. During installation with a hex driver the cone is pulled into the expansion sleeve and expands it against the hole wall. At the same time, the anchor is tightened through the compression on the black, plastic ring. This means that the anchor sleeve sits below the edge of the drill hole in an approval-compliant manner. The fischer high-performance anchor FH II-I is ideal for fixing stadium seats, railings, and staircases in outdoor areas.

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Pipeline routes
Ventilation systems
Sprinkler systems

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Approvals

ETA-07/0025
DoP No. 0197

Functionality

The FH II-I is suitable for pre-positioned installation.
When a hexagon wrench is used for installation, the internal thread bolt starts to rotate. This pulls the cone into the expansion sleeve and expands it against the drill-hole wall. At the same time, the anchor is tightened through compression of the black plastic ring. A gap U to the concrete surface is created (see image 4).
The anchor is set according to the approval when the gap U is 3-5 mm. Alternatively, an installation torque of T_inst can also be applied.

Mounting Strip 1 Picture

1 / 5

ETA-approval
Drill diameter ( d₀ )	12 mm
Packaging	Folding box
Amount	25 pcs
GTIN (EAN-Code)	4048962168396

fischer High performance anchor FH II 12/M6 I R with internal thread stainless steel

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download