Art.-No. 569372

fischer rail SolarFish 4.85 m AL, Aluminium

Top Features

High cross-section for maximum versatility
Compatible with both PMU/PMCU universal clamps and PM-F/PM-C pre-assembled clamps
AW 6063 T6 aluminium

Universal aluminium profile for photovoltaic systems on pitched and flat roofs

Advantages

The 44 mm high cross-section makes SolarFish the ideal solution for building most structures for photovoltaic systems.
Compatible with both PMU/PMCU universal clamps and PM-F/PM-C pre-assembled clamps.
The ribs with different lengths make it possible to optimize the structure according to the size of the PV panels used and therefore reduces waste.
The SolarFish rail can be used very flexible with its two side grooves and one lower groove compatible with the quick couplings of the GTA hooks or with SKS M8 screws or RHS hammer head screws.

fischer SolarFish is an aluminium alloy rail that can be used on both flat and pitched roofs for photovoltaic systems. In addition to its versatility, the rail allows for quick and easy installation. In the lower and side grooves, SKS M 8 screws or RHS hammer head screws can be applied. In the upper groove, hammer head nuts FCN AL and MW brackets can be used for cross joints.The rail has been designed with a length that reduces waste and facilitates handling on site. SolarFish (#558358) can be applied on pitched roofs with the hooks GTA 1, GTA 2, GTA 3, GC, GTP, GTPR, GT 130 and GTX 150. On flat roof systems, it is suitable for installations with the triangular frames STFS 10°-13°, STFS 10°-15° and STFS 25°-30°-35°.

Properties

Aluminium alloy AW 6063 T6 in accordance with EN 755-2:2013.

Applications

Construction of structures for PV panels, suitable for pitched roofs in flat tiles or barrel tiles with:

GTA 1 hook
GTA 2 hook
GTA 3 hook
GT 130 and GT 150 (5 mm) hook
GC hook
GTP hook
GTPR hook

Corrugated panel roofs with:

STSR double-threaded screw
double-threaded screw

Standing seam panel roofs with:

DLA clamp
DLAK clamp

Corrugated panel roofs with:

STFN triangular frames
STFS triangular frames

Approvals

TUV - R 60154136

Functionality

Identify the correct support system based on the type of roof (e.g. flat tile hooks, barrel tile hooks, triangular frames for flat roofs, standing seam clamps, triangular frames for flat roofs, etc.)
Assemble the SolarFish rail on the selected support through the lower groove or side grooves.
To connect two SolarFish rails, install two CPN AL joints on both sides of the rail, making them slide inside the side grooves until it touches the stud in the centre of the joint.
Complete the connection by locking each end of the CPN AL connection with 4 x 3.5 mm x 9.5 mm self-drilling screws on each side of the SolarFish rail.
To limit thermal expansion, it is advisable to create series of rails connected to each other up to a maximum length of 15 m. Beyond this measure it is necessary to interrupt the structure and start again with a new rail disconnected from the previous ones.
Install the clamps through the upper groove of the rail.
Fix the PV panels by tightening the clamps.
Apply the AK SP caps to the ends of the SolarFish rail for a clean finish.

Length ( l )	4.850 mm
Weight	0,9222 kg/m
Amount	1 pcs.
GTIN (EAN-Code)	8001132111154

fischer rail SolarFish 4.85 m AL, Aluminium

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download